USD
EUR
GBP
AUD
Precision Motor Shaft Adaptation Procedures
The Hubs may be precisely adapted to motor shaft diameters of 4mm, 5mm, 6mm, 6.35mm, 8mm, 9mm, 9.5mm and 10.0mm. Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.
The Hubs may be precisely adapted to motor shaft diameters of 4mm, 5mm, 6mm, 6.35mm, 8mm, 9mm, 9.5mm and 10.0mm. Remove the desired locating ring by twisting. Insert the ring with draft angle as shown in the lower figures.
Propeller Diameter X(Inch) :15.0
Propeller Pitch Y(Inch) :10.0
Rotation : CCW
Propeller Pitch Y(Inch) :10.0
Rotation : CCW
