Rctimer 5010 620KV Multirotor Quadcopter Brushless Motor

Features:
1.Machined aluminum front housing with four fan-style cooling holes that pump air through the motor while it runs.
2.Rear threaded mounting holes with both 16 mm and 19mm hole spacings fit a variety of applications.
3.Specially designed NdFeB magnets with high temperature rating for trouble-free operation.
4.High Temperature 140 C (356 F) rated wire is used for winding the motors to minimize the risk of burning up the motor.
5.High quality stator plates are epoxy coated on the inner surface to prevent winding shorts. 0.20mm stator plate id used on this
motor 5010.
6.High quality shielded and permanently lubricated ball bearings are used to support the motor shaft in all our motors.
7.High temperature adhesives are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out .
 

Motor size: Ф50*10mm
Shaft size: Ф5.0mm
Weight: 80g
KV(rpm/v): 620
Battery: 2-6Li-Po
ESC: 10A
119mΩ
Cable 40cm
 

	NO LOAD		ON LOAD			LOAD TYPE
VOLTAGE	CURRENT	SPEED	CURRENT	Pull	Power	Battery/prop
V	A	rpm	A	g	W
11.1	0.5	6940	6.4	500	71.0	LiPoх3/9x6(APC)
			6.8	650	75.5	LiPoх3/10x4.5(APC)
			8.3	740	92.1	LiPoх3/11x4.7(APC）
			13	1020	144.3	LiPoх3/12x3.8(APC）
14.8	0.5	9250	10.4	830	153.9	LiPoх4/9x6(APC)
			11.1	1000	164.3	LiPoх4/10x4.5(APC)
			13.1	1200	193.9	LiPoх4/11x4.7(APC）
			21.2	1590	313.8	LiPoх4/12x3.8(APC）
18.5	0.6	11560	15.3	1240	283.1	LiPoх5/9x6(APC)
			16.1	1470	297.9	LiPoх5/10x4.5(APC)
			18.7	1730	346.0	LiPoх5/11x4.7(APC）
			29	1970	536.5	LiPoх5/12x3.8(APC）
22.2	0.7	13870	21	1650	466.2	LiPoх6/9x6(APC)
			21.8	1940	484.0	LiPoх6/10x4.5(APC)
			23.9	2190	530.6	LiPoх6/11x4.7(APC