Rctimer 5010 530KV Multirotor Brushless Motor

Features:
1.Machined aluminum front housing with four fan-style cooling holes that pump air through the motor while it runs.
2.Rear threaded mounting holes with both 16 mm and 19mm hole spacings fit a variety of applications.
3.Specially designed NdFeB magnets with high temperature rating for trouble-free operation.
4.High Temperature 140 C (356 F) rated wire is used for winding the motors to minimize the risk of burning up the motor.
5.High quality stator plates are epoxy coated on the inner surface to prevent winding shorts. 0.20mm stator plate id used on this
motor 5010.
6.High quality shielded and permanently lubricated ball bearings are used to support the motor shaft in all our motors.
7.High temperature adhesives are used to secure the stator windings and prevent them from shifting and getting pinched or shorting out .
 

Motor size: Ф50*10mm
Shaft size: Ф5.0m m
Weight: 80g
KV(rpm/v): 530
Battery: 2-6Li-Po
ESC: 10A
127mΩ
Cable 40cm
 

	NO LOAD		ON LOAD			LOAD TYPE
VOLTAGE	CURRENT	SPEED	CURRENT	Pull	Power	Battery/prop
V	A	rpm	A	g	W
11.1	0.5	5990	4.6	400	51.1	LiPoх3/9x6(APC)
			4.9	480	54.4	LiPoх3/10x4.5(APC)
			6.1	600	67.7	LiPoх3/11x4.7(APC）
			9.6	860	106.6	LiPoх3/12x3.8(APC）
14.8	0.5	7990	7.7	680	114.0	LiPoх4/9x6(APC)
			8	810	118.4	LiPoх4/10x4.5(APC)
			9.5	1000	140.6	LiPoх4/11x4.7(APC）
			15.6	1370	230.9	LiPoх4/12x3.8(APC）
18.5	0.6	9990	11	1010	203.5	LiPoх5/9x6(APC)
			11.5	1220	212.8	LiPoх5/10x4.5(APC)
			13.8	1450	255.3	LiPoх5/11x4.7(APC）
			22.2	1820	410.7	LiPoх5/12x3.8(APC）
22.2	0.7	11990	15.4	1390	341.9	LiPoх6/9x6(APC)
			15.8	1650	350.8	LiPoх6/10x4.5(APC)
			18.1	1900	401.8	LiPoх6/11x4.7(APC）
			30	2100	666.0	LiPoх6/11x4.7(APC）